PART 2 (simpler method)

knowledge should be shared..!!! (Στα Ελληνικά παρακάτω)

LEGO 1×2 STL file for mill  legop1x2_red.zip

LEGO 2×6 STL file for mill legop2x6_red.zip

Mill and check it !!!

3D dental scanner CAD/CAM

Hi

   By the innovative technique I describe below all standards in the digital record in prosthetic dentistry  will change and also the necessary time will be shorter .

   So far all the 3D dental scanners companies to insert digital data they needed-among other tasks the insert of occlusion (bite) of plaster model or bite of putty on a plaster model or extra articulators.

   This technique was both difficult and time consuming especially in case of implants or expanded without teeth areas (difficult to stability the plaster model ) .

   All the scanner software developers stepping on the technique I describe will manage to get away of the old time-consuming procedure in which they had to insert specific plaster model casts for the data of the convergence. Now the only thing you will need is to insert some specific 3D markers to specific position on the plaster model (upper and low jaws) and nothing else. The data of the convergence will come up automatically just like preparation abutments which are scanned and align automatically in their digital position on the digital plaster model.

   So what can be the result of all these ? Half the time needed and more accurate records !

   All will be based on this technique, innovative idea I describe below.

I’ll keep you informed with new video of this technique !!

(there are youtube video in the end of this post)

Knowledge sould be shared !!

Με την καινοτόμα τεχνική που περιγράφω παρακάτω θεωρώ οτι θα αλλάξουν τα δεδομένα στην ψηφιακή καταγραφή των δεδομένων μιας προσθετικής οδοντιατρικής εργασίας και θα φανεί σε σύντομο χρονικό διάστημα.

Μέχρι σήμερα απο όλες τις εταιρίες 3d scanners η εισαγωγή ψηφιακών δεδομένων απαιτούσε πέρα των άλλων και την καταγραφή της δήξης με την εισαγωγή των εκμαγείων ακινητοποιημένα στην επιθυμητή σύγκλιση ή καταγραφή ενός δαγκώματος απο παχύρρευστο υλικό τοποθετημένο πάνω σε ένα εκμαγείο

Η διαδικασία αυτή ήταν και χρονοβόρα αλλά και δύσκολη στη σωστή ακινητοποίηση των εκμαγείων ιδίως σε περιπτώσεις εμφυτευμάτων ή εκτεταμένων νωδών περιοχών.

Οι software developers των σκανερς σύμφωνα με την τεχνική που περιγράφω θα αλλάξουν τα δεδομένα όπως τα γνώριζαν και υπήρχαν και θα φύγουν απο την τυποποιημένη τακτική που είχαν να εισάγουν απαραίτητα τα εκμαγεία για την καταγραφή της σύγκλισης. Το μονο που θα χρειάζεται θα είναι η εισαγωγή κάποιων markers σε πολλή συγκεκριμένες θέσεις στα εκμαγεία πάνω και κάτω και τίποτα άλλο. Έτσι η καταγραφή της σύγκλισης θα βγαίνει αυτόματα όπως συμβαίνει με τα κολοβώματα που σκανάρονται και τοποθετούνται αυτόματα στη ψηφιακή θέση τους πάνω στο ψηφιακό εκμαγείο.

Το αποτέλεσμα όλων αυτών ποιο θα είναι ; Χρόνος καταγραφής των ψηφιακών δεδομένων στο μισό και πιο ακριβείς καταγραφές.

Όλα θα βασίζονται πάνω σε αυτήν την καινοτόμα ιδέα  που περιγράφω παρακάτω

Έπεται συνέχεια…..

(Υπαρχει youtube video παρακατω. Δωστε λίγο χρόνο να φωρτωθεί )

knowledge should be shared..!!! (Στα Ελληνικά παρακάτω)

3D dental scanner CAD/CAM

Hi

   By the innovative technique I describe below all standards in the digital record in prosthetic dentistry  will change and also the necessary time will be shorter .

   So far all the 3D dental scanners companies to insert digital data they needed-among other tasks the insert of occlusion (bite) of plaster model or bite of putty on a plaster model or extra articulators.

   This technique was both difficult and time consuming especially in case of implants or expanded without teeth areas (difficult to stability the plaster model ) .

   All the scanner software developers stepping on the technique I describe will manage to get away of the old time-consuming procedure in which they had to insert specific plaster model casts for the data of the convergence. Now the only thing you will need is to insert some specific 3D markers to specific position on the plaster model (upper and low jaws) and nothing else. The data of the convergence will come up automatically just like preparation abutments which are scanned and align automatically in their digital position on the digital plaster model.

   So what can be the result of all these ? Half the time needed and more accurate records !

   All will be based on this technique, innovative idea I describe below.

I’ll keep you informed with new video of this technique !!

(there are youtube video in the end of this post)

Knowledge sould be shared !!

 

Με την καινοτόμα τεχνική που περιγράφω παρακάτω θεωρώ οτι θα αλλάξουν τα δεδομένα στην ψηφιακή καταγραφή των δεδομένων μιας προσθετικής οδοντιατρικής εργασίας και θα φανεί σε σύντομο χρονικό διάστημα.

Μέχρι σήμερα απο όλες τις εταιρίες 3d scanners η εισαγωγή ψηφιακών δεδομένων απαιτούσε πέρα των άλλων και την καταγραφή της δήξης με την εισαγωγή των εκμαγείων ακινητοποιημένα στην επιθυμητή σύγκλιση ή καταγραφή ενός δαγκώματος απο παχύρρευστο υλικό τοποθετημένο πάνω σε ένα εκμαγείο

Η διαδικασία αυτή ήταν και χρονοβόρα αλλά και δύσκολη στη σωστή ακινητοποίηση των εκμαγείων ιδίως σε περιπτώσεις εμφυτευμάτων ή εκτεταμένων νωδών περιοχών.

Οι software developers των σκανερς σύμφωνα με την τεχνική που περιγράφω θα αλλάξουν τα δεδομένα όπως τα γνώριζαν και υπήρχαν και θα φύγουν απο την τυποποιημένη τακτική που είχαν να εισάγουν απαραίτητα τα εκμαγεία για την καταγραφή της σύγκλισης. Το μονο που θα χρειάζεται θα είναι η εισαγωγή κάποιων markers σε πολλή συγκεκριμένες θέσεις στα εκμαγεία πάνω και κάτω και τίποτα άλλο. Έτσι η καταγραφή της σύγκλισης θα βγαίνει αυτόματα όπως συμβαίνει με τα κολοβώματα που σκανάρονται και τοποθετούνται αυτόματα στη ψηφιακή θέση τους πάνω στο ψηφιακό εκμαγείο.

Το αποτέλεσμα όλων αυτών ποιο θα είναι ; Χρόνος καταγραφής των ψηφιακών δεδομένων στο μισό και πιο ακριβείς καταγραφές.

Όλα θα βασίζονται πάνω σε αυτήν την καινοτόμα ιδέα μου που περιγράφω παρακάτω

Έπεται συνέχεια…..

(Υπαρχει youtube video παρακατω. Δωστε λίγο χρόνο να φωρτωθεί )